Carrier<Carrier>

RepCap Settings

# Range: Nr1 .. Nr2
rc = driver.configure.wcdmaMeas.multiEval.limit.rcdError.eecdp.carrier.repcap_carrier_get()
driver.configure.wcdmaMeas.multiEval.limit.rcdError.eecdp.carrier.repcap_carrier_set(repcap.Carrier.Nr1)

SCPI Command :

CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:EECDp:CARRier<carrier>

class CarrierCls[source]

Carrier commands group definition. 7 total commands, 5 Subgroups, 1 group commands Repeated Capability: Carrier, default value after init: Carrier.Nr1

class GetStruct[source]

Response structure. Fields:

Enable_Dpcch: bool: No parameter help available
Beta_Dpcch: int: No parameter help available
Sf_Dpcch: int: No parameter help available
Nom_Cdp_Dpcch: float: No parameter help available
Eff_Cdp_Dpcch: float: No parameter help available
Enable_Dpdch: bool: No parameter help available
Beta_Dpdch: int: No parameter help available
Sf_Dpdch: int: No parameter help available
Nom_Cdp_Dpdch: float: No parameter help available
Eff_Cdp_Dpdch: float: No parameter help available
Enable_Hs_Dpcch: bool: No parameter help available
Beta_Hsdpcch: int: No parameter help available
Sf_Hs_Dpcch: int: No parameter help available
Nom_Hs_Dpcch: float: No parameter help available
Eff_Hs_Dpcch: float: No parameter help available
Enable_Edpcch: bool: No parameter help available
Beta_Edpcch: int: No parameter help available
Sfe_Dpcch: int: No parameter help available
Nom_Edpcch: float: No parameter help available
Effe_Dpcch: float: No parameter help available
Enable_Edpdch_1: bool: No parameter help available
Beta_Edpdch_1: int: No parameter help available
Sfe_Dpd_Ch_1: int: No parameter help available
Nom_Edpdch_1: float: No parameter help available
Eff_Edpdch_1: float: No parameter help available
Enable_Edpdch_2: bool: No parameter help available
Beta_Edpdch_2: int: No parameter help available
Sfe_Dpd_Ch_2: int: No parameter help available
Nom_Edpdch_2: float: No parameter help available
Eff_Edpdch_2: float: No parameter help available
Enable_Edpdch_3: bool: No parameter help available
Beta_Edpdch_3: int: No parameter help available
Sfe_Dpd_Ch_3: int: No parameter help available
Nom_Edpdch_3: float: No parameter help available
Eff_Edpdch_3: float: No parameter help available
Enable_Edpdch_4: bool: No parameter help available
Beta_Edpdch_4: int: No parameter help available
Sfe_Dpd_Ch_4: int: No parameter help available
Nom_Edpdch_4: float: No parameter help available
Eff_Edpdch_4: float: No parameter help available

class SetStruct[source]

Structure for setting input parameters. Contains optional setting parameters. Fields:

Enable_Dpcch: bool: No parameter help available
Beta_Dpcch: int: No parameter help available
Sf_Dpcch: int: No parameter help available
Enable_Dpdch: bool: No parameter help available
Beta_Dpdch: int: No parameter help available
Sf_Dpdch: int: No parameter help available
Enable_Hs_Dpcch: bool: No parameter help available
Beta_Hsdpcch: int: No parameter help available
Sf_Hs_Dpcch: int: No parameter help available
Enable_Edpcch: bool: No parameter help available
Beta_Edpcch: int: No parameter help available
Sfe_Dpcch: int: No parameter help available
Enable_Edpdch_1: bool: No parameter help available
Beta_Edpdch_1: int: No parameter help available
Sfe_Dpd_Ch_1: int: No parameter help available
Enable_Edpdch_2: bool: No parameter help available
Beta_Edpdch_2: int: No parameter help available
Sfe_Dpd_Ch_2: int: No parameter help available
Enable_Edpdch_3: bool: No parameter help available
Beta_Edpdch_3: int: No parameter help available
Sfe_Dpd_Ch_3: int: No parameter help available
Enable_Edpdch_4: bool: No parameter help available
Beta_Edpdch_4: int: No parameter help available
Sfe_Dpd_Ch_4: int: No parameter help available

get(carrier=Carrier.Default) → GetStruct[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:EECDp:CARRier<carrier>
value: GetStruct = driver.configure.wcdmaMeas.multiEval.limit.rcdError.eecdp.carrier.get(carrier = repcap.Carrier.Default)


    INTRO_CMD_HELP: Specifies the channel configuration in the uplink signal. This command has the same effect as the sum of the following commands:

    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Dpcch.set
    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Dpdch.set
    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Hsdpcch.set
    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Edpcch.set
    - CONFigure:WCDMa:MEAS<i>:MEValuation:LIMit:RCDerror:EECDp:CARRier<c>:EDPDch<no>

Please refer to these commands for additional information (ranges and *RST values) . The parameter array described below is repeated for each channel (eight times) in the following order: DPCCH, DPDCH, HS-DPCCH, E-DPCCH, E-DPDCH 1, … , E-DPDCH 4. Thus a setting requires 3*8 values and a query returns 5*8 values.

param carrier:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)

return:

structure: for return value, see the help for GetStruct structure arguments.

set(structure: SetStruct, carrier=Carrier.Default) → None[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:EECDp:CARRier<carrier>
structure = driver.configure.wcdmaMeas.multiEval.limit.rcdError.eecdp.carrier.SetStruct()
structure.Enable_Dpcch: bool = False
structure.Beta_Dpcch: int = 1
structure.Sf_Dpcch: int = 1
structure.Enable_Dpdch: bool = False
structure.Beta_Dpdch: int = 1
structure.Sf_Dpdch: int = 1
structure.Enable_Hs_Dpcch: bool = False
structure.Beta_Hsdpcch: int = 1
structure.Sf_Hs_Dpcch: int = 1
structure.Enable_Edpcch: bool = False
structure.Beta_Edpcch: int = 1
structure.Sfe_Dpcch: int = 1
structure.Enable_Edpdch_1: bool = False
structure.Beta_Edpdch_1: int = 1
structure.Sfe_Dpd_Ch_1: int = 1
structure.Enable_Edpdch_2: bool = False
structure.Beta_Edpdch_2: int = 1
structure.Sfe_Dpd_Ch_2: int = 1
structure.Enable_Edpdch_3: bool = False
structure.Beta_Edpdch_3: int = 1
structure.Sfe_Dpd_Ch_3: int = 1
structure.Enable_Edpdch_4: bool = False
structure.Beta_Edpdch_4: int = 1
structure.Sfe_Dpd_Ch_4: int = 1
driver.configure.wcdmaMeas.multiEval.limit.rcdError.eecdp.carrier.set(structure, carrier = repcap.Carrier.Default)

    INTRO_CMD_HELP: Specifies the channel configuration in the uplink signal. This command has the same effect as the sum of the following commands:

    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Dpcch.set
    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Dpdch.set
    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Hsdpcch.set
    - method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Limit.RcdError.Eecdp.Carrier.Edpcch.set
    - CONFigure:WCDMa:MEAS<i>:MEValuation:LIMit:RCDerror:EECDp:CARRier<c>:EDPDch<no>

Please refer to these commands for additional information (ranges and *RST values) . The parameter array described below is repeated for each channel (eight times) in the following order: DPCCH, DPDCH, HS-DPCCH, E-DPCCH, E-DPDCH 1, … , E-DPDCH 4. Thus a setting requires 3*8 values and a query returns 5*8 values.

param structure:

for set value, see the help for SetStruct structure arguments.

param carrier:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.wcdmaMeas.multiEval.limit.rcdError.eecdp.carrier.clone()

Subgroups