UeSignal

SCPI Commands :

CONFigure:WCDMa:MEASurement<instance>:UESignal:DPDCh
CONFigure:WCDMa:MEASurement<instance>:UESignal:ULConfig
CONFigure:WCDMa:MEASurement<instance>:UESignal:SFORmat
CONFigure:WCDMa:MEASurement<instance>:UESignal:CMPattern

class UeSignalCls[source]

UeSignal commands group definition. 5 total commands, 1 Subgroups, 4 group commands

get_cm_pattern() → PatternType[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:CMPattern
value: enums.PatternType = driver.configure.wcdmaMeas.ueSignal.get_cm_pattern()

Selects the expected TPC pattern for UL compressed mode.

return:

pattern_type: AR: pattern A (rising TPC) defined in 3GPP TS 34.121, table 5.7.6 AF: pattern A (falling TPC) defined in 3GPP TS 34.121, table 5.7.7 B: pattern B defined in 3GPP TS 34.121, table 5.7.8

get_dpdch() → bool[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:DPDCh
value: bool = driver.configure.wcdmaMeas.ueSignal.get_dpdch()

Defines whether the UL DPCH contains a DPDCH.

return:

dpdch: OFF: DPCCH only ON: DPCCH plus DPDCH

get_sformat() → int[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:SFORmat
value: int = driver.configure.wcdmaMeas.ueSignal.get_sformat()

Selects the slot format for the UL DPCCH.

return:

slot_format: No help available

get_ul_config() → UlConfiguration[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:ULConfig
value: enums.UlConfiguration = driver.configure.wcdmaMeas.ueSignal.get_ul_config()

Selects the uplink signal configuration.

return:

ul_configuration: QPSK: QPSK signal WCDMa: WCDMA R99 signal HSDPa: signal with HSDPA-related channels HSUPa: signal with HSUPA channels HSPA: HSDPA-related and HSUPA channels HSPLus: HSDPA+ related channels HDUPlus: HSDPA+ related and HSUPA channels DHDU: dual carrier HSDPA+ and dual carrier HSUPA active

set_cm_pattern(pattern_type: PatternType) → None[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:CMPattern
driver.configure.wcdmaMeas.ueSignal.set_cm_pattern(pattern_type = enums.PatternType.AF)

Selects the expected TPC pattern for UL compressed mode.

param pattern_type:

AR: pattern A (rising TPC) defined in 3GPP TS 34.121, table 5.7.6 AF: pattern A (falling TPC) defined in 3GPP TS 34.121, table 5.7.7 B: pattern B defined in 3GPP TS 34.121, table 5.7.8

set_dpdch(dpdch: bool) → None[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:DPDCh
driver.configure.wcdmaMeas.ueSignal.set_dpdch(dpdch = False)

Defines whether the UL DPCH contains a DPDCH.

param dpdch:

OFF: DPCCH only ON: DPCCH plus DPDCH

set_sformat(slot_format: int) → None[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:SFORmat
driver.configure.wcdmaMeas.ueSignal.set_sformat(slot_format = 1)

Selects the slot format for the UL DPCCH.

param slot_format:

No help available

set_ul_config(ul_configuration: UlConfiguration) → None[source]

# SCPI: CONFigure:WCDMa:MEASurement<instance>:UESignal:ULConfig
driver.configure.wcdmaMeas.ueSignal.set_ul_config(ul_configuration = enums.UlConfiguration._3CHS)

Selects the uplink signal configuration.

param ul_configuration:

QPSK: QPSK signal WCDMa: WCDMA R99 signal HSDPa: signal with HSDPA-related channels HSUPa: signal with HSUPA channels HSPA: HSDPA-related and HSUPA channels HSPLus: HSDPA+ related channels HDUPlus: HSDPA+ related and HSUPA channels DHDU: dual carrier HSDPA+ and dual carrier HSUPA active

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.wcdmaMeas.ueSignal.clone()

Subgroups

Carrier<Carrier>
- Scode