RcdError

SCPI Command :

CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:ECDP
class RcdErrorCls[source]

RcdError commands group definition. 8 total commands, 1 Subgroups, 1 group commands

class EcdpStruct[source]

Structure for setting input parameters. Fields:

  • Threshold_Bpsk_1: float: Lower ECDP threshold for BPSK requirement 1

  • Threshold_Bpsk_2: float: Lower ECDP threshold for BPSK requirement 2

  • Limit_Bpsk_1: float: RCDE limit for BPSK requirement 1

  • Limit_Bpks_2: float: RCDE limit for BPSK requirement 2 (limit = this value minus ECDP)

  • Threshold_4_Pam_1: float: Lower ECDP threshold for 4PAM requirement 1

  • Threshold_4_Pam_2: float: Lower ECDP threshold for 4PAM requirement 2

  • Limit_4_Pam_1: float: RCDE limit for 4PAM requirement 1

  • Limit_4_Pam_2: float: RCDE limit for 4PAM requirement 2 (limit = this value minus ECDP)

get_ecdp() → EcdpStruct[source]
# SCPI: CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:ECDP
value: EcdpStruct = driver.configure.wcdmaMeas.multiEval.limit.rcdError.get_ecdp()

Defines upper limits for the relative CDE (RCDE) of BPSK and 4PAM modulated channels. For each modulation format, two requirements are defined.

return:

structure: for return value, see the help for EcdpStruct structure arguments.

set_ecdp(value: EcdpStruct) → None[source]
# SCPI: CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:ECDP
structure = driver.configure.wcdmaMeas.multiEval.limit.rcdError.EcdpStruct()
structure.Threshold_Bpsk_1: float = 1.0
structure.Threshold_Bpsk_2: float = 1.0
structure.Limit_Bpsk_1: float = 1.0
structure.Limit_Bpks_2: float = 1.0
structure.Threshold_4_Pam_1: float = 1.0
structure.Threshold_4_Pam_2: float = 1.0
structure.Limit_4_Pam_1: float = 1.0
structure.Limit_4_Pam_2: float = 1.0
driver.configure.wcdmaMeas.multiEval.limit.rcdError.set_ecdp(value = structure)

Defines upper limits for the relative CDE (RCDE) of BPSK and 4PAM modulated channels. For each modulation format, two requirements are defined.

param value:

see the help for EcdpStruct structure arguments.

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.wcdmaMeas.multiEval.limit.rcdError.clone()

Subgroups