Edpdch<EdpdChannel>

RepCap Settings

# Range: Nr1 .. Nr4
rc = driver.wcdmaMeas.multiEval.carrier.trace.rcdError.sf.edpdch.repcap_edpdChannel_get()
driver.wcdmaMeas.multiEval.carrier.trace.rcdError.sf.edpdch.repcap_edpdChannel_set(repcap.EdpdChannel.Nr1)

SCPI Commands :

FETCh:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:SF:EDPDch<nr>
READ:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:SF:EDPDch<nr>

class EdpdchCls[source]

Edpdch commands group definition. 2 total commands, 0 Subgroups, 2 group commands Repeated Capability: EdpdChannel, default value after init: EdpdChannel.Nr1

fetch(carrier=Carrier.Default, edpdChannel=EdpdChannel.Default) → List[float][source]

# SCPI: FETCh:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:SF:EDPDch<nr>
value: List[float] = driver.wcdmaMeas.multiEval.carrier.trace.rcdError.sf.edpdch.fetch(carrier = repcap.Carrier.Default, edpdChannel = repcap.EdpdChannel.Default)

Returns the spreading factors for the E-DPDCH 1 to 4. Each current value refers to a half-slot or a full-slot, depending on the measurement period (see method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Mperiod.modulation) . The number of results depends on the measurement length (see method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.msCount) .

Suppressed linked return values: reliability

param carrier:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)

param edpdChannel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Edpdch’)

return:

edpdch: Spreading factors, one result per measured slot or half-slot

read(carrier=Carrier.Default, edpdChannel=EdpdChannel.Default) → List[float][source]

# SCPI: READ:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:SF:EDPDch<nr>
value: List[float] = driver.wcdmaMeas.multiEval.carrier.trace.rcdError.sf.edpdch.read(carrier = repcap.Carrier.Default, edpdChannel = repcap.EdpdChannel.Default)

Returns the spreading factors for the E-DPDCH 1 to 4. Each current value refers to a half-slot or a full-slot, depending on the measurement period (see method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.Mperiod.modulation) . The number of results depends on the measurement length (see method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval.msCount) .

Suppressed linked return values: reliability

param carrier:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)

param edpdChannel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Edpdch’)

return:

edpdch: Spreading factors, one result per measured slot or half-slot

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.wcdmaMeas.multiEval.carrier.trace.rcdError.sf.edpdch.clone()