Current

SCPI Commands :

READ:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:DPCCh:CURRent
FETCh:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:DPCCh:CURRent

class CurrentCls

Current commands group definition. 2 total commands, 0 Subgroups, 2 group commands

fetch(carrier=Carrier.Default) → List[float]

# SCPI: FETCh:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:DPCCh:CURRent
value: List[float] = driver.wcdmaMeas.multiEval.carrier.trace.rcdError.dpcch.current.fetch(carrier = repcap.Carrier.Default)

Returns the values of the relative CDE vs slot traces for the DPCCH and the DPDCH. Each current value is averaged over a half-slot or a full-slot, depending on the measurement period (see method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval. Mperiod.modulation) . The number of results depends on the measurement length (see method RsCMPX_WcdmaMeas.Configure. WcdmaMeas.MultiEval.msCount) . The results of the current, average, maximum and standard deviation traces can be retrieved. The standard deviation traces cannot be displayed at the GUI.

Suppressed linked return values: reliability

param carrier:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)

return:

dpcch: Relative CDE trace results, one result per measured slot or half-slot.

read(carrier=Carrier.Default) → List[float]

# SCPI: READ:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:RCDerror:DPCCh:CURRent
value: List[float] = driver.wcdmaMeas.multiEval.carrier.trace.rcdError.dpcch.current.read(carrier = repcap.Carrier.Default)

Returns the values of the relative CDE vs slot traces for the DPCCH and the DPDCH. Each current value is averaged over a half-slot or a full-slot, depending on the measurement period (see method RsCMPX_WcdmaMeas.Configure.WcdmaMeas.MultiEval. Mperiod.modulation) . The number of results depends on the measurement length (see method RsCMPX_WcdmaMeas.Configure. WcdmaMeas.MultiEval.msCount) . The results of the current, average, maximum and standard deviation traces can be retrieved. The standard deviation traces cannot be displayed at the GUI.

Suppressed linked return values: reliability

param carrier:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)

return:

dpcch: Relative CDE trace results, one result per measured slot or half-slot.